Printing Tatoo

Choose the right profile, for Roland printers for example the TTRH – Garment Heat Transfer profile. Switch of the heating, it will dry fast anyway.

Cutting Tatoo

In case of small details to be cut in areas with a lot of ink, try to cut first, return to base point and print then. This is not a standard procedure, but it actually works very well.

Fastness of Tatoo 

In order to achieve maximum washing fastness with Tatoo we recommend a re-pressing after peeling off the tape, with the Tatoo graphic in direct contact with the heat press. You can re-press Tatoo without any protective material, Tatoo will not stick or transfer inks to the heat press.

> Opaque flex film with incredible touch
> Waterbased PU
> OEKO-TEX Class I
> Thickness (without liner): 60μ
> Printable with Ecosolvent, Solvent and UV-Inks

> Transfer Temperature: 165°C (330°F)
> Transfer Time: 7 seconds + 15 seconds repressing without the tape (direct contact with the press)
> Pressure: Medium/High Fastness: 60°C
OR
> Transfer Temperature: 165°C (330°F)
> Transfer Time: 17 seconds
> Pressure: Medium/High
> Fastness: 40°C

SUITABLE FOR STANDARD TEXTILES